Templeton Flax Mill
Flax stripping, scutching and storytelling
Aotearoa New Zealand’s last working flax mill brings alive the early industry of processing harakeke fibre. See the authentic belt and wooden spindle, pulleys and iron shaft-driven machinery whirr into action. Discover the vital role of flax in Murihiku Southland’s history and hear stories about the Templeton family and the mill workers.
View on mapSix decades of flax milling history
Harakeke – a vital resource
Māori traversed the land around the Templeton flax mill site for centuries. The bordering coastal wetlands between the Aparima River mouth and the Oreti River entrance were important seasonal food gathering places for waterfowl, flounder and eels. Harakeke, of the Southern Oue variety, thrived in the low-lying land interspersed with totara and manuka, freshwater lagoons, peat swamps, sandhills and gravel ridges. Although harakeke (Phormium tenax) is commonly called ‘New Zealand flax’, it belongs to a different plant family and is not a true flax botanically.
Māori harvested Oue for many uses, including thatching huts, weaving kete (baskets), mats, cordage, nets and sandals. Skilled Māori women weavers, using mussel shells, deftly stripped flax and wove the dressed white fibres (muka) into garments. From 1823, Kāti Mamoe and Kāi Tahu iwi at nearby Pahia and Ruapuke Island commenced trading muka with visiting European captains for export to Britain via Sydney in exchange for iron goods, muskets, shot and gunpowder.
From natural resource to thriving business
William Templeton relocated and established a commercial flax mill at Otaitai Bush in 1911, having leased a 2,000 acre ‘run’ that grew abundant flax, had a good source of clean water, and was close to Riverton - to supply workers. In 1921, the mill had to be rebuilt after sparks from the stationary steam engine destroyed the mill. In 1933, the mill was converted from steam power to electricity. After another disastrous fire in 1943, new stripper and scutching sheds were built on the current site.
During World War I and World War II, flax milling was declared an essential industry. The fibre was used for domestic rope and twine production and exported to the USA and Britain to replace fibre sources cut off by war. During WWII’s Pacific campaign, American marines on troopships clambered down landing nets made of New Zealand flax to retake the Pacific islands.
When flax exports ceased after World War I, the Templeton mill exclusively supplied flax to Donaghy’s rope and twine factory at Waikuku, North Canterbury. From 1932, the short fibre ‘tow’ by-product was railed north to the NZ Wool Packs and Textiles factory at Foxton for manufacturing woolpack, sacks and hardwearing carpet matting. Previously, tow fibre was used in plaster ceilings and furniture and car upholstery padding.
The backbreaking work of flax milling
Flax milling was hard work. Cutters used razor-sharp hooked knives to cut bundles of harakeke leaf close to the ground, often in cold damp conditions. An operator fed flax leaves into the stripper at speed while watching their fingers. The water-scutcher chainman, working under running water, gathered and twisted the washed fibre into hanks, which was then hung outside to dry and bleach in the sun. Later the dried fibre was flailed and combed in the duel scutcher before being pressed into 200kg bales of flax. Around 20 men were employed at the mill, which processed 12 tons (10, 866 kg) of green flax daily to produce 1 ¼ tons (1,133kg) of finished fibre.
The end of the flax mill era
In 1969, a change to New Zealand's price control regulations brought cheaper natural fibre imports from East Africa and Bangladesh into the country. Competition with low-wage producers, combined with domestic wage increases and the advent of oil-based nylon ropes, made local flax milling unprofitable. By the early 1970s, flax mills across the country closed. The Otaitai Bush mill shut in late December 1971, ending 60 years and three generations of the Templeton family milling enterprise.
What to see and do at Templeton Flax Mill
Explore the flax mill buildings and pā harakeke
The flax mill is home to a remarkably intact collection of historic Category 1 listed buildings and machinery. In 2000, the Templeton Flax Milling Heritage Trust was formed under the leadership of Chairman Desmond Templeton, the last mill manager. Later recognised with a Queen’s Service Medal, Desmond set out to restore the mill, preserve the milling craft and share the story of the flax-milling industry. The museum opened in 2004.
Today you can explore the stripping shed (containing a working flax stripper and scutcher) and the Otanomomo shed which houses displays and interpretation. The pā harakeke (harakeke garden) showcases several plant variations with different use properties.
Flax fibre processing demonstrations
The volunteer team offer remarkable working demonstrations of flax fibre processing by appointment. Watch the flax stripper’s revolving bladed drum that strips and bruises the outer green flesh from the leaves, the water scutcher that paddles and washes the inner fibre clean, and the endless chain system that moves the wet fibre along to a chainman. The wet fibre is hung out on fences to dry for a fortnight.
You will see the scutching process, where revolving iron-toothed beaters flail and dress the fibre, combing out unstripped leaf tips and short fibre (tow by-product). The finished fibre is sold to weavers, artists and learning institutions.
Family stories and photographs
Enjoy a short video, featuring the late Desmond Templeton, who shares his family's 100-year connection with the mill. Multiple interpretation panels and family photographs around the complex tell stories of flax milling and the men who worked at the mill. The volunteer staff have their own stories to share, so be sure to ask questions.
Visitor information